Endfold 35: For Top Hung Interior Folding Partitions on Endfold Track Systems. Max 35kg Each Door

Endfold 35

Application

Endfold is designed for interior folding shutters and doors in residential and light commercial applications. It allows up to six panels to fold in each direction with a weight capacity of 35kg. The system uses three morticed hinges to swing the first panel off the jamb. The jamb panel is smaller than the other panels to allow for the hanger offset. The panels can fold to either one or both sides of the opening and can also be stacked behind a reveal if required. A bottom channel and guide system is recommended for applications with three  or more panels folding in one direction.

Specification:

Max Panel Weight: 35kg
Max Panel Width: 900mm
Max Panel Height: 2400mm
Min Panel Thickness: 35mm or 38mm with Flush Bolts
Max Number of Panels: 6 each way

2 Panel Unit Hinged to Post: 1 Hanger, 6 Hinges (1 x Guide & 1 Channel are optional, 2 x Flush Pulls & 1 x Flush Bolt are optional)

3 Panel Unit Hinged to Post Inc.  Access Door: 1 Hanger, 9 Hinges (1 x Guide & 1 Channel are required, 2 x Flush Pulls & 1 x Flush Bolt are optional)

4 Panel Unit Hinged to Post: 2 Hangers, 12 Hinges (2 x Guides & 1 Channel are required, 3 x Flush Pulls & 2 x Flush Bolts optional)

4 Panel ‘Floating’ Unit: 3 Hangers, 9 Hinges (2 x Guides & 1 Channel are required, 3 x Flush Pulls & 2 x Flush Bolts are optional)

5 Panel Unit Hinged to Post Inc.  Access Door: 2 Hangers, 15 Hinges (2 x Guides & 1 Channel are required, 3 x Flush Pulls & 2 x Flush Bolts are optional)

6 Panel Unit Pivoted to one side: 3 Hangers, 18 Hinges (3 x Guides & 1 Channel are required, 4 x Flush Pulls & 3 x Flush Bolts are optional)

6 Panel ‘Floating’ Unit: 4 Hangers, 15 Hinges (3 x Guides & 1 Channel are required, 4 x Flush Pulls & 3 x Flush Bolts are optional)

2 Additional Panels: 1 Hangers, 6 Hinges

Hardware Specification

Track:100 | Material: Clear Anodised | Standard Lengths: 2000mm, 3000mm, 4000mm and 6000mm

Bracket (Face Fix): Bracket 316 Stainless Steel 1SS/250 | Brackets located close together at the pivot end of the track with other brackets at 400mm centres.

Hanger: 35ENP | Hanger fitted with nylon tyre wheels on ball race bearings. Vertical adjustment is simple and positive.

Hinge: 282SS | Stainless steel hinge for 19mm minimum panel thickness, 65mm tall, non-mortice 

Guide: 106SSMF | Stainless steel plate with precision bearing

Channels: 96W | Finish: Clear Anodised | Standard Lengths: 2000mm, 3000mm, 4000mm and 6000mm

Accessories: Flush Pull: 401 | Flush bolt: 456